![]() ![]() Alternatively, since you do not need the neutral for your 240V device, you can cap it off entirely in the box. If you have a white neutral wire, connect it so that wires coming in and out continue onward, bypassing the device. If the thermostat's electrical box is metal, it also must be grounded, with a pigtail wire or with a grounded conduit path. ![]() Without touching any of the wires, lift the thermostat away from. That third ground will attach to the device (or you will use the wire already on the device). 1.Take the cover off the thermostat and remove the screws that attach it to the junction box. ![]() Wire-nut the two ground wires, adding a third ground wire. If you have a grounded thermostat: Does your thermostat have a green ground screw on it? Or similarly, does it have a green or bare wire coming out of it? If so, this is the wire that connects your device to the ground, and this is crucial for safety. The Stelpro Ki is wired directly to the power source so. You will wire-nut the ground wire coming in with the ground wire leaving the box, bypassing the device entirely. You will never have to replace any batteries or worry about losing connection because of a weak battery. If there is no ground for the thermostat: Devices such as a Cadet Mechanical Thermostat are plastic, and thus, do not require grounding. If you are obscure about what you are doing, then it is best to leave it as it may alarm. It is easy to install this line voltage thermostat, and all you need to do is match the 2 wires or sometimes 4 of them together. There are two ways to approach the attachment of the ground wire to the thermostat: Be careful when installing a Line Voltage Thermostat.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |